Showing posts with label garage. Show all posts
Showing posts with label garage. Show all posts

Tuesday, 21 July 2015

Garage Decoration

When I started writing this blog, my intention was to record my automotive learning curve and the amazing people and fellow enthusiasts I met along the way.

Today I met one of those awesome people.

With all the bits and pieces I have been accumulating ready for when I start work on Leif, our house was looking a bit of a mess, so my wife and I (mainly me) decided it would be a good idea to get a tool box to store everything in until it can be used in the garage.

I started looking online and quickly became overwhelmed at the vast range on offer.  I decided to ask others for their opinion and recommendations, so I posted a question in the Western Australia Facebook group "Steel Bumper Car Cruisers WA"; a group where I knew there was a lot of practical hands on people.


Very quickly recommendations came in for me to speak to Cameron North of Tool & Consumable Solutions Australia (TCS Australia) for assistance.



Cameron was awesome.  I told him what I was looking for and my budget and he soon came back with two options for my consideration.  After making my selection I transferred the payment and today, 2 days later, my purchases were dropped off at my house.

Delivery!

After a good chat with Cameron I couldn't wait to open my boxes and check out my new purchase, the first tool box I have ever owned!

 Sporty wheels, and we all know red goes faster

 Some simple assembly and hey presto....

...so excited!!!!  
(There is a handle to go on the side but I don't need it to be fitted at the moment)

I was really impressed with the solidness and weight of the unit, but it was the spring loaded latch on each drawer to stop them flying open that made me smile the most.

Each drawer has a lock to stop them flying open, in addition to the key lock.

It will be at least 6 months before my garage is finished, so in the mean time it will sit in my house and store my stuff.

 Socket set fits beautifully within the lower section

A new home for my manuals and restored Land Rover badges for Leif

Thanks to those who got me in contact with TCS, and thanks to Cam; you certainly put a smile on my face.

Sunday, 22 June 2014

If you think professionals are expensive, wait until you see what an amateur will cost you!

The title of this post was the wording of a meme that I saw on Facebook several months ago.

These words struck a cord with me and speak of a mindset that I wish more people would take into consideration when undertaking any project, be that a life event or in the working world. In the long run it will save you a lot of stress and a lot of money.

For this very reason, not long after buying UGU and joining the MBCCWA, I made enquires to find a qualified mechanic who could give UGU a thorough examination and tell me exactly what I had bought.  The mechanic recommended to me, from day one has been amazing, and whilst I am frustrated that I am not capable do the work myself, I take comfort in the fact a talented professional takes care of my car, and has always been knowledgeable, genuine and honest with me. Who else can say that about their mechanic?


When UGU's advertisement appeared on gumtree this is what it said:


Not a lot of information you will agree, and the photographs are not much better as they didn't even show the full car, but it was enough to get me excited and so I lifted the phone.

At this stage I didn't even know for sure that the car was a W114, but it was a coupe, it looked original and was in my price range.  Being a relative novice to buying cars, and in particular a classic car, I actually didn't know what to ask when the seller answered the phone.  I think I blurted out "why are you selling it" and "does it have its original number plates?"

The gentleman owner was selling it so he could get his wife a new car, and it did have it's original number plates.  The very next morning I was standing in the seller's driveway, which as those of you who have read previous posts will know, lead to my purchase of UGU.

This may be a ridiculous notion, but I believe if a car still has its original number plates some 43 years since they were first fitted, it means the car has always been in the ownership of someone who has at least considered it important to keep the car licensed and roadworthy, which likely means it has been used and therefore maintained. (I am aware this will not be relevant in other countries, but in Western Australia if the car becomes unregistered, when it is reregistered, new number plates are issued).

During my inspection of the car I tried to look like I knew what I was doing, so I opened the bonnet, yep, there was an engine and it looked clean and unmolested with no obvious leaks.  There were only a few oil stains on the garage floor where the car sat, I couldn't see any major rust in the body and the interior looked great. After further opening and closing of doors, bonnet, boot and tyre kicking I took it for a drive.

Straight away I was surprised how light the car was to drive and that it had power steering.  It accelerated strongly, changed gears well and stopped quickly and in a straight line under heavy braking.  I couldn't think of anything else to check so concentrated on trying to hide my excitement and smile while I negotiated the price with the owner. The deal was done.

My wife drove away in her car and I followed in UGU.  At the first service station we pulled in and I got out to put some fuel in.  My inexperience immediately became apparent as I wondered what fuel to use.  Thankfully the car had the original manuals so I quickly looked up "fuel" and saw 98 octane unleaded was required.  I got out of the car and wondered around it checking both sides for the fuel filler flap but couldn't find it.  By this stage I was getting flustered as other cars started queueing behind me so I got back into the car I drove away from the pump and once again referred to the manual.  How I missed the large rectangular flap next to the rear number plate I will never know!!

With the car filled up, a quick look underneath revealed no sign of leaks from the fuel tank, so I wound down the windows and headed for the freeway with a smile from ear to ear.

Three weeks after the initial purchase, and two weeks after my first contact with Walter Epple, I drove the short distance to his business, Auto Exclusive Perth located in East Perth.

   
UGU at Auto Exclusive Perth

I was so nervous leaving UGU there, not because of where we were, but because I was worried I may have bought trouble as I will admit my initial inspection was conducted with rose tinted glasses and excitement racing through my veins.

   
Walter Epple & UGU in the workshop at Auto Exclusive Perth


Walter was friendly and told me he would give me a call when the car was ready so I left.  As with any car I had owned before, I assumed I would be picking UGU up the same day, but no phone call came so I waited. The next afternoon I called to see if I should come in, Walter advised me that he needed to replace a few bits and that the car would be ready the following day.  True to his word the next day UGU was ready to go home.  I went into the office and Walter went through the issues he had discovered, the most concerning was a fuel leak which was dangerously close to the manifold.  He politely asked where the car had been serviced before and I told him the previous owner had a "friend" i.e. an amateur working on it.  (refer to post title)

Once I told him this, he seemed relieved that what he was about to say was not going to insult me,  "that person had no clue what they were doing!"  Somehow the fuel filter had been put in back to front, starving the engine so the carburettors had all been messed about with to try and make the car run, the idle speed was wrong, the fuel lines were badly corroded, the fan was in back to front and the oil cap had no gasket.  Not a great start but it could have been worse.

Since then, UGU has been back for much other work and maintenance, including a complete overhaul of the brake system including lines, hoses, discs and pads, further cleaning and adjustment to the carburettors, new tie-rod ends, new steering dampener, new subframe mounts, repair of dash cluster lights, new rear muffler, a rebuild of the gearbox (a bill not for the faint hearted), and most recently the installation of a replacement starter motor.

  
Rebuilt and reinstalled gearbox

Not long after the gearbox was rebuilt UGU went back to Auto Exclusive for a general service. I just happened to mention to Walter that sometimes when changing from 1st to 2nd gear the engine revs seemed to lift.  I can best describe this as someone driving a manual car and changing gear without lifting your foot from the accelerator.

Later in the day I went back to pick UGU up and Walter said to me "I am really unhappy with your car", my heart sank fearing he had found something else wrong.  He went on to tell me that the gearbox specialist he had outsourced the rebuild to had done another job for him and it had become problematic, and he feared the same would happen with me.  Whilst that work came with a one year warranty, Walter said he was not happy going back to the same place and asked if I would be happy for him to keep UGU so that he could take the gearbox back out and send it away to be rebuilt elsewhere at his expense.  I was so taken aback I didn't know what to say, I felt thankful and yet so guilty that he was going to be thousands of dollars out of pocket.

A week later Walter called to say UGU was now ready to go home. At Walter's workshop he showed me some of the pieces that had been taken out of the gearbox following the first rebuild. They included torn seals and pins that were too short as well as some other bits all meaning that the gearbox would definitely have failed again.

Six months on, every time I see Walter he always asks me how the gearbox is going, to which my response is always a positive,"very well."

All this work to UGU has come at considerable cost and many people would probably have just sold the car, but like most die hard enthusiasts, my car has become part of the family and even served as our wedding car in 2013.  Whilst it is not ideal I am happy to make sacrifices elsewhere so that I can keep her on the road and my passion alive. After all, the cheapest car you can have, is the car you currently own.


UGU in her wedding attire





Tuesday, 20 May 2014

Headlights (part 2) Setting

So now that the new headlight units are installed it's time to set the beam to ensure that you are getting the maximum out of the emitted light and not blinding oncoming traffic.

There is lot and lots of information online including detailed videos and instructions on how to do this.  I watched and read lots of them and they all generally say the same thing.  In summary this is what I did.

Step 1. Remove all cargo from the boot and interior of the car unless it is regularly carried.  It is recommended that the car has half a tank of fuel,

Step 2. On a flat level surface, drive the car square up to the garage wall,

Step 3. Using masking tape, make a vertical mark on the wall to locate the centre of the car, (This was made very easy by the Mercedes-Benz bonnet emblem)

Step 4. Make two further vertical marks on the wall, one at the centreline of each headlight.  If you measure the distance of these markings to either side of your car centreline, the measurements should be the same.  If not, recheck your measurements,

Step 5. Roll the car back slightly so you can get between it and the wall.  Using a measuring tape, measure the height of the centre of the light bulb from the ground.  Mark this height with a horizontal line on the wall.  Note it should makes a cross on the wall as it passes over the vertical headlight centreline made previously,

Step 6.  Move the car back 5metres from the wall ensuring it remains square with the garage wall,

Step 7. Turn on your main beam headlights.  The most intense light should be adjusted to focus on the cross you have made on the wall.  It is best to concentrate on one light at a time so cover the other with towel or blanket.  

I found by screwing up my eyes and squinting it made it easier to see where was the most intense light focus.

Step 8. Keeping in mind we are dealing with a RHD car, by switching the lights back to low beam, the light focus will drop approximately 75mm below the horizontal line on the wall and to the left of the vertical line, towards the pavement.

Step 9.  Repeat this process for the other headlight.

As I said before there is heaps of information on-line but this process worked for me.


Main beam turned on prior to adjustment.  The right hand side light was pretty good, but whilst the left was at a good height, the beam needed to be aimed further left to hit the marks made on the wall.


Low beam turned on prior to adjustment. As you can see the light focus drops to the required height but the left light is very far right of the vertical mark on the wall.


Main beam lights and lower fog lights on.  All working and set as required. All I needed to do now was fit the chrome trim and........


... take the car for a drive in the dark.  As you can see the spread of light in front of the car is even and illuminates the pavement ahead.  Job done!

Monday, 19 May 2014

Headlights (part 1) Installation


About six months after buying the car, and following many washes, polishes and general admiring of my new coupe, it was a friend that pointed out to me that the car had two different styles of headlight. How I never noticed I am not quite sure, but after the obvious was pointed out to me I could suddenly see the elephant in the room, which unfortunately meant that every time I looked at the car the mismatched lights was all I could see.

The difference was that one headlight was the original type with a lovely bevelled glass lens, the other was a replacement from a later series 2 model which has a flat lens and H4 written on the glass.  The difference is subtle and the majority of people would never have noticed, but to me this scar on her face had to go!

Follow a few months of searching on-line, a set of bevelled headlights came up for sale on Gumtree and I snapped them up for a very reasonable $80AUD

As soon as I got home with my new purchase I set to work removing the headlights from the car before dismantling them, and the new units.  With all four units in pieces, all parts were cleaned, before I selected the best bits and built up two good, matching headlight units.

This was all very straight forward and only required a few screwdrivers.  My only advice would be to handle the reflectors with extreme care.  Not knowing how fragile they were, I attempted to wipe one of the dirtier reflectors with a damp cloth to remove the grime but discovered that this was enough to remove the silver coating!  So, of to the bin with that piece.

With the new headlights assembled and looking significantly better as a matching pair I re-installed them in the car, remembering not to refit the finishing chrome trim at this point as I would need to check the alignment of the light beam.



New set with bevelled glass lenses sourced...


Headlights removed from car...


All bits cleaned and best parts selected...


New matching set ready to be installed...


Left over bits.  You can clearly see the two different styles of glass.  The one on top has much squarer edges, this is the series 2, H4 lens.  Reflector in RHS unit has no silver coating left after a gentle wipe with a cloth. DO NOT DO THIS! Also fog light reflector on same unit has no silver left and rust is setting in...


New matching set installed minus the chrome trim so that headlight beam can be adjusted.