De-chromafication

With Jade's bumpers, grille and headlights removed, a phone call from a really nice chap on the other side of the country who needed some chrome for his car, motivated me to get moving with the next stage of Jade's de-chromafication.

I few of the hip line trim pieces were already damaged making these a good place to start to see how easily the parts would come off; after all I didn't want to damage parts that someone else was able to use.

To my I surprised the hip line and sill trim pieces all come off very easily.  All I used was a cloth covered large flat screwdriver, and worked my way along each piece popping the clips out of the holders.  Jade may have been an exceptions as the trim had already been removed one already when Jade changed colour, cars with original paint may not be so easy.

Starting with a damaged one.  

Here you can see the red fixings that hold all the trim pieces in place.  

It is a simple press fixing.

So much chrome, part of the /8's appeal

 

The quarter panel hip line trim is almost 2metres long!!!

The sill trim for some reason had had new fixings points drilled into the sill which, with little consideration for the old one that were left unfilled, potentially assisted with the spread of moisture and therefore rust within the sills.  Not a good example of "out of sight, out of mind".

WHY??!!!! Why would you add twice as many holes into the sill?

Most alarming was the amount of crud that I found under the rear window trim.  This is of corner to me as UGU already has a rust blister under her back window which I have been trying to ignore, but seeing this I realise that I need to deal with it before winter arrives in June.

It is easy to see how rusting under the back window is so common 

when this much crud gets trapped under the trim.

Thankfully the clever folk at Mercedes-Benz in the late '60's must have know the day would come when I would need to post parts across Australia, so the rear window surround breaks down into several pieces thanks to these corner backing plates.

 Rear window trim as we would see it installed on the car

Rear window trim seen from the back with helpful backing plate holding the trim together 

A few of us have had lengthy discussions on W(A)114/115 debating a topic that gets a surprising amount of back lash from the purists: Chrome wheel-arch mouldings, WAM's for short.

Love them or hate them, WAM's appeal to a lot of people and are a common sight on many classic cars and, on the right body coloured car, I quite like them too, but being from the UK, I like many other people had concerns that they would trap moisture and lead to rust.  However, in our climate in Western Australia, we have busted this myth, it is simply not the case and Jade is another example of that.  Despite the huge amount of rust seemly everywhere in her body, the fenders and in near perfect, rust free condition.

WAM's removed and there is no evidence of rust on the 

fenders despite common misconception

Windscreen bottom lip trim and windscreen wiper cowl

So, with the chrome now all off, it's time to get them packed up and off to their new owner.

What's the next task you ask? hmmm, not sure yet so keep posted.